-
PENETRON
Cementitious, concrete surface applied (slurry application) or for filling cavities (pourable application), crystal growth waterproofing mortar. Indicative mixing: For surface application, 1 bag is mixed in 12–13 Lt water, but the mixing of half bag with 6-6.5 Lt water is recommended. For spraying application, increase the mixing water to 14-15 Lt/bag. For pourable application, mix with 15-18 Lt water/bag depending the required workability.
CONSUMPTION INFORMATION
Indicatively, the consumption in concrete surface application is 1,4-1,6 Kg/m2 in total 2 coats or 1 bag for approx. 14-16 m2 . In pourable application, consider a consumption of 1,2-1,3 Kg of product for filling 1 Lt void. -
PENETRON ADMIX RP
PENETRON ADMIX RP CRYSTALLINE WATERPROOFING AND DURABILITY ADMIXTURE
PENETRON ADMIX RP is our tried and true Penetron Admix formulation with the addition of red pigment to meet the specification requirements of certain precast underground markets. Packaged in convenient, pre-measured soluble bags for quality control and easy application, PENETRON ADMIX RP is ready to use when adding product to the new concrete batch. As a quality guarantee, PENETRON ADMIX RP features a red pigment to permanently color the concrete to ensure visibility at a distance during inspection and to signal that genuine PENETRON ADMIX RP is in the mix.
Applications
- Sewers and manholes
- Underground vaults
- Any underground precast structures
-
PENETRON ADMIX
Crystal growth, cementitious powder, waterproofing system added to concrete as an admixture. The product can be used in the ready mix plant with the form of powder directly added in the pre-weighted dry parts of concrete (in the lift-band) before the water addition or by addition in the mix truck, at the job site, right after the mixing (with electric mixer) with water – in the special mixing pails with measure. Mixing water ratio: mix well ½ of 18 Kg bag in 11.5 Lt water. The small packaging of 3.75 Kg pail is convenient for the production of waterproofed mortars or small quantity of concrete in a small mixer. Mixing time in the mix truck or small mixer is at least 5 min.
CONSUMPTION INFORMATION
The recommended PENETRON ADMIX® ratio for permanently waterproofed concrete is 0.8-1% by weight of cement. For regular concrete ~300 Kg cement, we use 3 Kg product powder per m3 of concrete. E.g. for 9 m3 mix truck we use: 3 Kg x 9 = 27 Kg, that is 1½ PENETRON ADMIX® bag. It is easier to cut in half the bags, then mix 3 half bags in 3 mixing pails with 11.5 Lt water each. For the production of waterproofed mortars (cement content >250 Kg/m3), the mixing of 0.5-1.0 Kg PENETRON ADMIX® per 50 Kg of cement is recommended. -
PENECRETE MORTAR
Crystal growth, cementitious waterproofing and repairing mortar. Supports all PENETRON® waterproofing systems. Mixing: indicatively for approx. 1 bag 4 Lt of water are required. The mixing of small quantities to a trowelable mortar consistency is recommended.
CONSUMPTION INFORMATION
For fillings, the indicative consumption is approx. 2 Kg/Lt or 11 Lt per 22.68 Kg bag. For construction joints or cracks repair, the indicative consumption is 1.3-1.5 Kg/linear meter. -
PENEPLUG
Rapid setting, crystal growth cementitious waterplug, designed to stop active water leaks and moisture ingress. Supports all PENETRON® waterproofing systems. In the mixing, a small quantity of water is required, forming the material into a wedge and always wearing rubber gloves.
CONSUMPTION INFORMATION
Indicatively, the consumption for voids filling is 1,2-1,4 Kg / Lt. -
PENEBAR SW 45 RAPID TYPE A
Rapid expansion, water expanding sealing strip. For its placement, use the bonding primer PENEBARTM PRIMER. Important: protect from water and rain, until concrete pouring.
Roll dimension: 19 mm x 25 mm x 5 m.CONSUMPTION INFORMATION
Calculation in linear meters. -
PENEBAR SW 45 RAPID TYPE B
Rapid expansion, water expanding sealing strip. For its placement, use the bonding primer PENEBARTM PRIMER. Important: protect from water and rain, until concrete pouring.
Roll dimension: 9 mm x 25 mm x 5 m.CONSUMPTION INFORMATION
Calculation in linear meters. -
PENEBAR SW 55 TYPE A
Water expanding sealing strip of slow, controlled expansion. Suitable for application in humidity and rain conditions. For its placement, use the bonding primer PENEBARTM PRIMER or masonry nails in conditions of intense humidity. Roll dimension: 19 mm x 25 mm x 5 m.
CONSUMPTION INFORMATION
Calculation in linear meters. -
PENEBAR PRIMER
Water expanding strip primer. Stabilizes the substrate and prevents the humidity penetration to the PENEBARTMSW. Important: the material must be well set prior to PENEBARTM SW placement. In conditions of intense substrate humidity, use masonry nails.
CONSUMPTION INFORMATION
Indicatively: 1 Lt primer covers ~60 linear meters or correspondingly 0,75 Lt pail for 40 – 48 m and 3,80 Lt pail for 200 – 240 m. -
PENEGUARD
PENEGUARDTM is a ready to use, specially formulated liquid copolymer that reinforces the normal and hardened surface of concrete and cementitious screeds, forming a protective finish that is resistant to water and stains. After its application to the surfaces, using a polishing machine, it reveals an aesthetic high gloss finish, like a wax with high shine and durability. It is combined as a finishing layer with anti-poluting properties, after the application of PENESEALTM FH systems.
CONSUMPTION INFORMATION
As a polishing product 34-49 m2 / L. As a sealing product 10-15 m2 / L. -
PENETRON MULTI PATCH
One component, non-sag cementitious mortar with synthetic fibers and special modified polymer additives for concrete repairs, stonewall joints, etc., up to 4-5 cm. Supports the repairing preparations of regular waterproofing systems such as SEAL COATTM System. Mixed with only 3,1-3,4 Kg water.
CONSUMPTION INFORMATION
Indicatively, in repairs, the consumption for voids filling, is ~2,0 Kg/L, hence 1 bag fills voids of approx. 12,5 L.
-
SEAL COAT SF100
SEAL COAT SF100 is used for waterproofing concrete, cement base mortar, stone or brick surfaces that will be sujected to positive or negative, low to medium hydrostatic pressure.
In cases of high hydrostatic pressure, use PENETRON® crystalline integral waterproofing system prior to application of SEAL COAT SF100.
SEAL COAT SF100 is used neat or with FIBERGLASS MESH between layers that will cover the FIBERGLASS MESH.
Basement and retaining walls Fire extinguishing reservoir, watering tank, etc. PlantersAPPLICATIONS
Uniformly apply the slurry coat of SEAL COAT SF100 with a short bristle brush, making sure to fill in all surface pores and voids.
NOTE: For maximum waterproofing performance, apply a second coat after first coat has dried, within 12 hours, if the first coat is not damaged.
