-
PENEGUARD
PENEGUARDTM is a ready to use, specially formulated liquid copolymer that reinforces the normal and hardened surface of concrete and cementitious screeds, forming a protective finish that is resistant to water and stains. After its application to the surfaces, using a polishing machine, it reveals an aesthetic high gloss finish, like a wax with high shine and durability. It is combined as a finishing layer with anti-poluting properties, after the application of PENESEALTM FH systems.
CONSUMPTION INFORMATION
As a polishing product 34-49 m2 / L. As a sealing product 10-15 m2 / L. -
SEAL COAT SF100
SEAL COAT SF100 is used for waterproofing concrete, cement base mortar, stone or brick surfaces that will be sujected to positive or negative, low to medium hydrostatic pressure.
In cases of high hydrostatic pressure, use PENETRON® crystalline integral waterproofing system prior to application of SEAL COAT SF100.
SEAL COAT SF100 is used neat or with FIBERGLASS MESH between layers that will cover the FIBERGLASS MESH.
Basement and retaining walls Fire extinguishing reservoir, watering tank, etc. PlantersAPPLICATIONS
Uniformly apply the slurry coat of SEAL COAT SF100 with a short bristle brush, making sure to fill in all surface pores and voids.
NOTE: For maximum waterproofing performance, apply a second coat after first coat has dried, within 12 hours, if the first coat is not damaged. -
SEAL COAT SF150
SEAL COAT SF150 is a two-component, specially designed, hyper-elastic waterproofing system of a cement base, mixed with a specially formulated polymer emulsion. SEAL COAT SF150 presents excellent bonding and elongation characteristics, which make it an ideal solution for surface waterproofing under temperature variations, crack bearing and moving surfaces (dynamic behavior). Can be used in conjunction with PENETRON®
crystalline integral waterproofing system for
combined protection.APPLICATIONS
Uniformly apply the slurry coat of SEAL COAT SF150 with a short bristle brush, making sure to fill in all surface pores and voids.
NOTE: For maximum waterproofing performance, apply a second coat, after 12 hours, if the first coat is not damaged. Apply the second layer the next day, when the first layer is dry. -
PENESEAL PRO RTU
Spray applied liquid sealer, which forms a sub-surface barrier, that protects concrete against positive water penetration (strength increase) and seals existing cracks. Protects above ground concrete structures, exposed to weather conditions. Ideal for concrete roofs, podium decks, bridge decks, terraces, runways and driveways.
CONSUMPTION INFORMATION
Ready to use material. In horizontal surfaces, the consumption is 1 Lt for 4-6 m2. Intense air and high temperatures increase consumption. Important: after curing, the material must be activated with 3 successive water floods per day (intense water floods). -
HYDROGUARD
PENETRON HYDROGUARD is a clear non-glossy water repellent that has the ability to extend the lifetime of concrete, natural stone such as sandstone or marble, paving, and bricks. PENETRON HYDROGUARD protects them against the elements that they are subjected to on a daily basis. Rain, salts, oils and chemicals all wear down the integrity of these surfaces over years, leading to unsightly stains from mold, algae and gradual decay. PENETRON HYDROGUARD is a non-toxic, one coat application that completely seals and waterproofs a variety of surfaces. PENETRON HYDROGUARD should not alter the color, texture, or any other physical characteristic of the surface to which it is applied, leaving a clear natural finish that will completely repel water, seal
and waterproof the surface.APPLICATIONS
PENETRON HYDROGUARD has a variety of recommended uses such as sealing of concrete and cementitious surfaces, as a architectural finish, sealing of brick and block work, natural stone such as granite, marble and sandstone. PENETRON HYDROGUARD can also be used in residential applications such as bathrooms, patios, decks, driveways, pathways and walls. PENETRON HYDROGUARD adds an additional layer of protection when applied over PENESEAL PRO. -
PENESEAL FH
Spray applied, chemically reactive, water based liquid sealer that penetrates concrete and masonry building materials, protecting, preserving and strengthening them permanently. Very strong dust stabilizer. Important: the material is concentrated and diluted with 1:1 water.
CONSUMPTION INFORMATION
The mixture consumption in flooring applications is 1 Lt for 4-5 m2, depending on the substrate absorbedness. Proportionally, the 19 Lt pail, after dilution (~38 Lt), covers150-180 m2. -
PENESEAL FH PS
PENESEAL™ FH-PS is a clear, reactive penetrating sealer designed to permanently protect, preserve, and strengthen concrete and masonry building materials. PENESEAL™ FH-PS was developed to absorb deep into the concrete capillaries where it reacts with hydration products transforming them into a harder, denser, stronger concrete mass. PENESEAL™ FH-PS is manufactured without metallic hydroxides which alleviates efflorescence and prevents reactive aggregate reactions such as ASR.
APPLICATIONS
Exterior & interior slabs
New & old concrete
Food & drug processing plants
Warehouses
Manufacturing facilities
